Viewing post #78557 by Henryr10
|When we built this we had to go beefy because it wintered indoors.
And at the time we didn't have a deck or boardwalk system.
It basically got dragged around until we got to the front porch.
Then then we could roll it into the LR.
We actually had one on each side of the TV thru the cold snaps.
We now pull the Tropicals and winter them in the GH.
The box stays outdoors.
I need to get some dimensions on the 5 Gallon Bucket but a cover shouldn't be any big deal.
An easy starter DIY project.
Does anyone need it to be wheeled?
Cause I'm thinking a true slip cover.
No bottom and you just slip it over the bucket.
Cedar or Pressure Treated Wood (Dog Earred Boards are REAL cheap and very rustic looking)
“The pain I feel now is the happiness I had before. That's the deal.”
« Return to the thread "CONSTRUCTING: A Bucket Planter Cover..."
« Return to DIY on a Shoestring Budget forum
« Return to the DIY on a Shoestring Budget cubit homepage