Custom woodworking forum: refurnish furniture
Views: 3, Replies: 0 » Jump to the end
|Sand the furniture. Use a fine-grit sandpaper to sand the furniture evenly after the topcoat has dried. Spend the same amount of time sanding each section with the grain, so that all parts of the furniture look even. If desired, add another layer of topcoat, let it dry, and sand again. Repeat until your furniture's finish looks good.
Replace the hardware. Screw the knobs, hinges, pulls and other hardware back onto the furniture after it is completely dry.
|« Back to the top
« Cubits.org homepage
« Furniture Forest cubit homepage
« Custom woodworking forum